Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) Engage the 6 claws and install the rear bumper assembly as shown in the illustration.





(b) Engage the 5 claws.





HINT
Use the same procedure for the RH side and LH side.

(c) Install the screw.





HINT
Use the same procedure for the RH side and LH side.

(d) Engage the 2 clips and install the 2 screws.





(e) Install the 2 bolts and 2 screws.





Bolt - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(f) Engage the 2 clips.

2. INSTALL REAR BUMPER PLATE LH

(a) Engage the 2 claws and install the rear bumper plate LH.





3. INSTALL REAR BUMPER PLATE RH

HINT
Use the same procedure for the RH side and LH side.