Removal

EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL

(a) Using a clip remover, remove the 12 clips and cool air intake duct seal.





2. REMOVE RADIATOR GRILLE Removal

3. REMOVE FRONT BUMPER ASSEMBLY

(a) Put protective tape around the front bumper assembly.





Text in Illustration





(b) Remove the 2 bolts and 6 screws.





(c) Using a clip remover, remove the clip.

(d) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(e) Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.





HINT
Use the same procedure for the RH side and LH side.

(f) Disengage the 4 claws and remove the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(g) Disconnect the fog light connector. (w/ Fog Light)

(h) Remove the front bumper assembly as shown in the illustration.