Removal

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG Disassembly

5. REMOVE ASSIST GRIP COVER Disassembly

6. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Disassembly

7. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Removal

8. REMOVE DOOR ARMREST COVER Disassembly

9. REMOVE COURTESY LIGHT ASSEMBLY Removal

10. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly

11. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY Disassembly

12. REMOVE FRONT DOOR TRIM BRACKET Disassembly

13. REMOVE FRONT DOOR SERVICE HOLE COVER Disassembly

14. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY Disassembly

15. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY Disassembly

16. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

(a) Using a T25 "TORX" driver, remove the 3 screws and the front power window regulator motor assembly.