Removal

P410 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER: REMOVAL

NOTICE:
If the shift lock control unit assembly is to be replaced with a new one, it is necessary to clear the learned shift sensor voltage value by disconnecting and reconnecting the cable of the negative (-) battery terminal Service Precautions.

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

7. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY

(a) Disconnect the connector from the shift lock control unit assembly.





(b) Remove the 3 nuts and shift lock control unit assembly.