Removal

P410 HYBRID TRANSMISSION / TRANSAXLE: HYBRID VEHICLE TRANSAXLE: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT
Removal

2. REMOVE FRONT CROSS MEMBER SUB-ASSEMBLY Removal

3. REMOVE FRONT ENGINE MOUNTING INSULATOR Removal

4. REMOVE REAR ENGINE MOUNTING INSULATOR Removal

5. REMOVE RADIATOR PIPE Removal

6. DISCONNECT WIRE HARNESS

(a) Remove the 2 bolts and disconnect the 6 connectors and 12 wire harness clamps.





7. REMOVE STARTER HOLE INSULATOR

(a) Remove the 2 bolts and starter hole insulator.





8. REMOVE FLYWHEEL HOUSING SIDE COVER

(a) Remove the flywheel housing side cover.





9. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

(a) Using wood blocks or equivalent, set an engine lifter to the hybrid vehicle transaxle assembly.

NOTICE:
Using a rope, wooden blocks or equivalent, secure the hybrid vehicle transaxle assembly to the engine lifter.

(b) Remove the 7 bolts and hybrid vehicle transaxle assembly.





NOTICE:
To avoid damage to the knock pin, do not pry the connecting portion of the hybrid transaxle and the engine.

10. REMOVE WIRE HARNESS CLAMP BRACKET

(a) Remove the 2 bolts and 2 wire harness clamp brackets.





11. REMOVE MOTOR CABLE BRACKET

(a) Remove the bolt and motor cable bracket.





12. REMOVE FRONT ENGINE MOUNTING BRACKET

(a) Remove the 3 bolts and front engine mounting bracket.





13. REMOVE REAR ENGINE MOUNTING BRACKET

(a) Remove the 4 bolts and rear engine mounting bracket.





14. REMOVE ENGINE MOUNTING BRACKET LH

(a) Remove the 3 bolts and engine mounting bracket LH.