Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: REMOVAL

NOTICE:
* Do not remove the steering angle sensor from the spiral cable.
* While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/ close the doors while the battery is connected.

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.

2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

3. REMOVE STEERING PAD

HINT
Refer to the procedure up to Remove Steering Pad Removal.

4. REMOVE STEERING WHEEL ASSEMBLY Removal

5. REMOVE LOWER STEERING COLUMN COVER Removal

6. REMOVE UPPER STEERING COLUMN COVER Removal

7. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR

(a) Remove the spiral cable with steering angle sensor Removal.

NOTICE:
* Do not replace spiral cable with steering angle sensor with the battery connected and the power switch on (IG).
* Do not rotate the spiral cable with steering angle sensor with the battery connected and the power switch on (IG).
* Ensure that the steering wheel is installed and aligned straight when inspecting the steering angle sensor.
* Do not remove the steering angle sensor from the spiral cable.