Interior Lighting System

LIGHTING (INT): LIGHTING SYSTEM: TERMINALS OF ECU

1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)





Text in Illustration





(a) Disconnect the 2A, 2B, 2C, 2E and L8 instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.

(b) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Measure the resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(d) Reconnect the 2A, 2B, 2C, 2E and L8 instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.

(e) Measure the voltage and check for pulses according to the value(s) in the table below.





* *1: w/ Footwell Light

* If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.

2. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)





Text in Illustration





(a) Disconnect the 2A, 2B, 2C and 2E instrument panel junction block assembly connectors.

(b) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Measure the resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(d) Reconnect the 2A, 2B, 2C and 2E instrument panel junction block assembly connectors.

(e) Measure the voltage and check for pulses according to the value(s) in the table below.





* *1: w/ Footwell Light

* If the result is not as specified, the main body ECU (multiplex network body ECU) or instrument panel junction block assembly may have a malfunction.

3. CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the L62 certification ECU (smart key ECU assembly) connector.





(b) Measure the voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(c) Measure the resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness.

(d) Reconnect the L62 certification ECU (smart key ECU assembly) connector.

(e) Measure the voltage and check for pulses according to the value(s) in the table below.





If the result is not as specified, the certification ECU (smart key ECU assembly) may have a malfunction.