Component Tests and General Diagnostics

LIGHTING (INT): PERSONAL LIGHT: INSPECTION

1. INSPECT MAP LIGHT ASSEMBLY (w/o Sliding Roof)

(a) Inspect the interior light operation.

(1) Connect a positive (+) lead from the battery to terminal 20 (+B1) and a negative (-) lead to terminal 11 (CTY).





(2) Turn the interior light door switch on.

(3) Turn the personal light switch off.

(4) Check that the interior lights come on.

OK:

Interior lights come on.

Text in Illustration





If the result is not as specified, replace the bulb or map light assembly.

(b) Inspect the personal light operation.

(1) Connect a positive (+) lead from the battery to terminal 20 (+B1) and a negative (-) lead to terminal 1 (GND1).

(2) Check that the personal lights come on.

OK:





If the result is not as specified, replace the bulb or map light assembly.

2. INSPECT MAP LIGHT ASSEMBLY (w/ Sliding Roof)

(a) Inspect the interior light operation.

(1) Connect a positive (+) lead from the battery to terminal 24 (+B1) and a negative (-) lead to terminal 13 (CTY).





(2) Turn the interior light door switch on.

(3) Turn the personal light switch off.

(4) Check that the interior lights come on.

OK:

Interior lights come on.

Text in Illustration





If the result is not as specified, replace the bulb or map light assembly.

(b) Inspect the personal light operation.

(1) Connect a positive (+) lead from the battery to terminal 24 (+B1) and a negative (-) lead to terminal 9 (GND1).

(2) Check that the personal lights come on.

OK:





If the result is not as specified, replace the bulb or map light assembly.