Removal

2ZR-FXE COOLING: THERMOSTAT: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE INLET AIR CLEANER ASSEMBLY Removal

3. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE SUB-ASSEMBLY Removal

4. DRAIN ENGINE COOLANT (for Engine) Coolant (for Engine)

5. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

(a) Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.

Text in Illustration

NOTICE:
* Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.
* Do not damage the water inlet with thermostat sub-assembly.

HINT
When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.

(b) Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.