Disassembly
DOOR / HATCH: BACK DOOR: DISASSEMBLY
1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY
(a) Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.
2. REMOVE BACK DOOR SIDE GARNISH RH
(a) Disengage the 3 clips and 2 claws, and remove the back door side garnish RH.
3. REMOVE BACK DOOR SIDE GARNISH LH
(a) Disengage the 3 clips and 2 claws, and remove the back door side garnish LH.
4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
(a) Using a moulding remover, disengage the clip and claw.
(b) Using a moulding remover, disengage the clip and claw.
(c) Disengage the 3 clips in the order shown in the illustration.
(d) Disengage the 2 clips by pulling the back door trim board assembly in the direction indicated by the arrows in the illustration.
(e) Remove the back door trim board assembly by pulling it in the direction indicated by the arrow in the illustration to disengage the 4 clips.
Text in Illustration
NOTICE:
Make sure to pull the back door trim board assembly in the direction indicated by the arrow in the illustration. If the back door trim board assembly is removed from the lower part, the door pull handle mounting area may interfere with the back door panel, resulting in damage to the back door trim board assembly.
5. REMOVE BACK DOOR TRIM BOARD
(a) Disengage the 5 clips and 2 guides, and remove the back door trim board.
6. REMOVE BACK DOOR LOCK STRIKER COVER
(a) Disengage the 2 claws and remove the back door lock striker cover.
7. REMOVE LOWER BACK DOOR STOPPER CUSHION
(a) Disengage the claws to remove the 2 lower back door stopper cushions.
8. REMOVE BACK DOOR LOCK STRIKER ASSEMBLY
(a) Using a T40 "TORX" socket wrench, remove the 2 screws and back door lock striker assembly.
9. REMOVE LOWER BACK DOOR STOPPER LH
(a) Remove the bolt and lower back door stopper LH.
10. REMOVE LOWER BACK DOOR STOPPER RH
HINT
Use the same procedure for the RH side and LH side.
11. REMOVE BACK DOOR STAY ASSEMBLY LH Removal
12. REMOVE BACK DOOR STAY ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
13. REMOVE BACK DOOR STAY BOLT LH Removal
14. REMOVE BACK DOOR STAY BOLT RH
HINT
Use the same procedure for the RH side and LH side.
15. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
16. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH Removal
17. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
18. REMOVE REAR SPOILER ASSEMBLY Removal
19. REMOVE REAR WASHER NOZZLE (w/ Rear Wiper) Removal
20. REMOVE REAR WIPER ARM HEAD CAP (w/ Rear Wiper) Removal
21. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Removal
22. REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper) Removal
23. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) Removal
24. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) Removal