Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY

(a) Engage the 4 claws and install the rear bumper assembly as shown in the illustration.





(b) Engage the 5 claws.





HINT
Use the same procedure for the RH side and LH side.

(c) Install the screw.





Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

HINT
Use the same procedure for the RH side and LH side.

(d) Engage the claw.

HINT
Use the same procedure for the RH side and LH side.

(e) Engage the 2 rear bumper upper stoppers and install the 2 screws.





(f) Install the 9 clips.





(g) Install the nut.