Start / Stop Switch: Testing and Inspection

2AR-FXE STARTING: POWER SWITCH: INSPECTION

1. INSPECT POWER SWITCH

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:





If the result is not as specified, replace the power switch.

(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the power switch.





Text in Illustration





HINT
* If a positive (+) battery lead and a negative (-) battery lead are incorrectly connected, the power switch indicator light will not illuminate.
* If the voltage is too low, the indicator light will not illuminate.

OK:





If the result is not as specified, replace the power switch.