Removal

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

5. REMOVE REAR SEAT CUSHION LOCK HOOK Removal

6. REMOVE REAR SEATBACK ASSEMBLY RH Removal

7. REMOVE NO. 2 ROOM PARTITION COVER Removal

8. REMOVE REAR SEATBACK ASSEMBLY LH Removal

9. REMOVE REAR SIDE SEATBACK ASSEMBLY LH Removal

10. REMOVE REAR SIDE SEATBACK ASSEMBLY RH Removal

11. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

(a) Remove the 2 nuts and child restraint seat anchor bracket sub-assembly LH.





12. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

(a) Remove the 2 nuts and child restraint seat anchor bracket sub-assembly RH.