Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. PRECAUTION (for HID Headlight)

Precaution

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER (for HID Headlight) Removal

3. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL (for HID Headlight)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE FRONT BUMPER ASSEMBLY

Removal

5. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the 3 screws and bolt.

(b) Disengage the clamp.