Removal
LIGHTING (INT): ROOM LIGHT: REMOVAL
1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws and remove the No. 1 room light lens.
Text in Illustration
(b) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration and remove the No. 1 room light housing.
Text in Illustration
(c) Using a screwdriver, disengage the 4 claws and disconnect the room light switch base from the No. 1 room light housing.
Text in Illustration
2. REMOVE SPOT LIGHT ASSEMBLY (w/ Sliding Roof)
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 8 claws and remove the 2 spot light lenses.
Text in Illustration
(b) Using a screwdriver with its tip wrapped with protective tape and moulding remover, disengage the 2 claws .
Text in Illustration
(c) Disengage the 2 claws and 2 claws
(d) Using a screwdriver, disengage the 8 claws and disconnect the 2 map light sub-assemblies from the spot light housing.
Text in Illustration
