Customize Parameters

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: CUSTOMIZE PARAMETERS

1. CUSTOMIZE METER / GAUGE SYSTEM

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Combination Meter / Warning.

(5) Select the setting by referring to the table below.

NOTICE:
* Be sure to record the current value before customizing.

Warning





* *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more

(b) Customizing with the combination meter assembly

HINT
* Press and hold the DISP switch to enter an item.
* Briefly press the DISP switch to select an item.

(1) Turn the power switch on (IG).

(2) Select the following menus: SETTINGS.

(3) Select the setting by referring to the table below.

NOTICE:
* Be sure to record the current value before customizing.

Settings





(4) Press and hold the DISP switch.

(5) Return to the item selection screen.