Initialization

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: INITIALIZATION

1. INITIALIZATION SERVO MOTOR

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Press the A/C OFF switch.

(e) Turn the Techstream on.

(f) Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

(g) According to the Techstream display, perform servomotor initialization.

HINT
During initialization, the A/C AUTO indicator light comes on, and then goes off when initialization has finished.

(h) According to the Techstream display, select the "Exit" switch to finish initialization.