Removal

2AR-FXE INTAKE / EXHAUST: EXHAUST MANIFOLD: REMOVAL

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

4. REMOVE ENGINE UNDER COVER LH

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Disconnect the heated oxygen sensor connector.





(b) Remove the 2 bolts, 2 compression springs and 2 nuts.





(c) Remove the front exhaust pipe assembly from the exhaust pipe support.

(d) Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.

6. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 4 bolts and No. 1 exhaust manifold heat insulator.





7. REMOVE AIR FUEL RATIO SENSOR Removal

8. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

(a) Remove the 3 bolts and No. 1 manifold converter insulator.





9. REMOVE NO. 2 EGR PIPE

(a) Remove the 2 bolts, 2 nuts and No. 2 EGR pipe.





(b) Remove the 2 gaskets.

10. REMOVE NO. 2 MANIFOLD STAY

(a) Remove the bolt, nut and No. 2 manifold stay.





11. REMOVE MANIFOLD STAY

(a) Remove the bolt, nut and manifold stay.





12. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

(a) Remove the 5 nuts and exhaust manifold converter sub-assembly.





(b) Remove the gasket.





13. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

(a) Remove the 2 bolts and No. 2 exhaust manifold heat insulator.