Transmitter Battery

DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.

(a) for Type A:

(1) Push the release hook knob and extract the mechanical key.





(2) Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.





Text in Illustration





HINT
Tape the screwdriver tip before use.

(3) Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).





Text in Illustration





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the transmitter battery. The terminals may be damaged.
* Do not touch the transmitter battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

HINT
Tape the screwdriver tip before use.

(b) for Type B:

(1) Push the release hook knob and extract the mechanical key.





(2) Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.





Text in Illustration





HINT
Tape the screwdriver tip before use.

(3) Disengage the 2 claws and remove the cover.





(4) Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).





Text in Illustration





NOTICE:
* Do not push the terminals with your finger.
* Do not forcibly pry up the transmitter battery. The terminals may be damaged.
* Do not touch the transmitter battery with wet hands. Water may cause rust.
* Do not touch or move any components inside the transmitter. It may interfere with proper operation.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

HINT
Tape the screwdriver tip before use.

2. INSTALL TRANSMITTER BATTERY

(a) for Type A:

(1) Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.





NOTICE:
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

(2) Install the transmitter housing cover by pressing down on it as shown in the illustration.





(3) Insert the mechanical key into the transmitter.





(4) Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when switch is pressed.

(b) for Type B:

(1) Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.





NOTICE:
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.
* When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

(2) Engage the 2 claws and install the cover.





(3) Install the transmitter housing cover by pressing down on it as shown in the illustration.





(4) Insert the mechanical key into the transmitter.





(5) Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when switch is pressed.