Removal

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL

1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Removal

2. REMOVE FRONT WHEEL LH

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

HINT
Use the same procedure for the RH side and LH side Removal.

4. REMOVE FRONT FENDER LINER LH

HINT
Use the same procedure for the RH side and LH side Removal.

5. REMOVE FRONT DOOR SCUFF PLATE LH Removal

6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

7. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal

8. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

9. REMOVE HOOD LOCK ASSEMBLY

(a) w/ Engine Hood Courtesy Switch:

(1) Disconnect the connector.

(b) Remove the 3 bolts.

10. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Using a screwdriver, disengage the 5 clamps and hood cable grommet as shown in the illustration.

Text in Illustration

HINT
Tape the screwdriver tip before use.

(b) Pull the hood lock control cable assembly from the engine compartment and remove it.