Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System): Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
- Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

INSPECTION PROCEDURE

NOTICE:
* Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.
* After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.

PROCEDURE

1. CHECK SATELLITE RADIO

(a) Check radio condition.

Result:





B -- CHECK SATELLITE RADIO

A -- REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Removal

2. CHECK SATELLITE RADIO

(a) Check the number of preset channels.

OK:

36 channels have already been preset.

NG -- CHECK AUXILIARY BATTERY

OK -- END (ONLY 36 CHANNELS CAN BE PRESET)

3. CHECK AUXILIARY BATTERY

(a) Check if the auxiliary battery was replaced.

OK:

Auxiliary battery was not replaced.

NG -- ADD PRESET CHANNEL INTO MEMORY AGAIN

OK -- REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Removal

4. ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.

NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table

OK -- END