CD Sound Skips

AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System): CD Sound Skips
- CD Sound Skips

INSPECTION PROCEDURE

NOTICE:
After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

PROCEDURE

1. CHECK CD

(a) Check that the CD is not deformed or cracked.





OK:

No deformation or cracks on the CD

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK CD

(a) Check the CD.





OK:

The CD is clean.

NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

HINT
If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NG -- CLEAN CD
OK -- Continue to next step.

3. REPLACE CD AND RECHECK

(a) Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

NG -- CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

OK -- CD WAS FAULTY

4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY

(a) Check the radio and display receiver assembly installation condition.

(1) Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.

NG -- REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY

OK -- REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Removal