Cellular Phone cannot Make Outgoing/Incoming Calls
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Radio and Display Type with Intuitive Parking Assist System): Cellular Phone cannot Make Outgoing/Incoming Calls
- Cellular Phone cannot Make Outgoing/Incoming Calls
INSPECTION PROCEDURE
PROCEDURE
1. CHECK "Bluetooth" SETTINGS
(a) Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.
OK:
The cellular phone is registered as a connected device and "Bluetooth" settings are correct.
NG -- SET SETTINGS CORRECTLY
OK -- Continue to next step.
2. CHECK SETTINGS AND CONDITIONS
(a) Check the cellular phone functions.
HINT
The cellular phone is unable to call under any of the following conditions:
* The cellular phone is locked.
* The phonebook is being transferred.
* The line is crossed.
* The cellular phone is outside service range.
* The power is off.
* The battery is low.
* The cellular phone is not connected via "Bluetooth".
OK:
None of the above conditions exist.
NG -- SET CORRECTLY
OK -- Continue to next step.
3. CHECK RECEPTION
(a) Place the cellular phone close to the navigation ECU sub-assembly.
(b) Set the cellular phone so that it can receive calls.
(c) Check if the cellular phone has reception according to the radio and display receiver assembly.
OK:
The cellular phone has reception.
NG -- CHECK CELLULAR PHONE
OK -- END
4. CHECK CELLULAR PHONE
(a) Check if the cellular phone can make a call.
HINT
The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.
OK:
Cellular phone can make a call.
NG -- REPAIR OR REPLACE CELLULAR PHONE
OK -- Continue to next step.
5. RESTART CELLULAR PHONE
(a) Restart the cellular phone.
(b) Register the cellular phone as a connected device again and check that the malfunction disappears.
OK:
Malfunction disappears.
NG -- CHECK CELLULAR PHONE
OK -- END
6. CHECK CELLULAR PHONE
(a) Check if the cellular phone is "Bluetooth" compatible.
HINT
Some versions of "Bluetooth" compatible cellular phones may not function.
OK:
The phone is "Bluetooth" compatible.
NG -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table
OK -- END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)