Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect each connector.

(b) Engage the 2 claws and install the front bumper assembly as shown in the illustration.





(c) Engage the 3 claws and install the front bumper assembly.





HINT
Use the same procedure for the RH side and LH side.

(d) Install the 7 screws and clip.

(e) Install the screw.

HINT
Use the same procedure for the RH side and LH side.

(f) Install the pin hold clip.





Text in Illustration





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

(a) Engage the 4 claws and 2 guides, and install the radiator grille sub-assembly.

(b) Install the 2 bolts and clip.

3. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the cool air intake duct seal with the 6 clips.

4. ADJUST FOG LIGHT AIMING

Adjustments