Installation

MF1A TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: INSTALLATION

1. INSTALL TRANSFER ASSEMBLY

(a) Install the transfer assembly to the transaxle assembly with 2 new bolts and the 6 nuts.





Torque : 69 Nm (700 kgf-cm, 51 ft-lbf)

NOTICE:
* Install the transfer assembly to the transaxle assembly horizontally.
* Do not touch the transfer assembly oil seals during installation.

2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 2GR-FE)

3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 1AR-FE) Installation

4. INSTALL FLEXIBLE HOSE BRACKET SUB-ASSEMBLY (for 2GR-FE)

5. INSTALL WIRE HARNESS (for 2GR-FE)

6. INSTALL WIRE HARNESS (for 1AR-FE) Installation

7. INSTALL TRANSFER STIFFENER PLATE RH (for 2GR-FE) Installation

8. INSTALL TRANSFER STIFFENER PLATE RH (for 1AR-FE) Installation

9. INSTALL MANIFOLD STAY (for 2GR-FE) Installation

10. INSTALL STARTER ASSEMBLY (for 2GR-FE) Installation

11. INSTALL STARTER ASSEMBLY (for 1AR-FE) Installation

12. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE) Installation

13. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE) Installation

14. INSTALL REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) Installation

15. INSTALL STEERING LINK ASSEMBLY Installation

16. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

17. INSTALL FRONT NO. 1 STABILIZER BRACKET LH Installation

18. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT
Perform the same procedure as for the LH side.

19. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

for 2GR-FE

Installation for 1AR-FE