Key-OFF Operation Function Operates Even If Operating Conditions Are Not Satisfied

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: Key-off Operation Function Operates even if Operating Conditions are not Satisfied
- Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

* When the driver door has not been opened and closed, each door power window regulator motor can control its power window operation for approximately 45 seconds after the ignition switch is turned from ON to off (the key is removed) by receiving operation permission signals from the main body ECU. However, when approximately 45 seconds have elapsed, or the driver door or front passenger side door is opened within approximately 45 seconds of the ignition switch being turned off (the key is removed), the power window regulator motor stops operating.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

(a) Check the power window operation function after the ignition switch is turned off.

Result





A -- REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
B -- Continue to next step.

2. CHECK LIGHTING SYSTEM (ILLUMINATED ENTRY SYSTEM)

(a) Check the lighting system (illuminated entry system) operates normally.

HINT
The illuminated entry system provides convenience when getting in or out of the vehicle at night. This system controls the interior light.

Both the key off operation function and lighting system (illuminated entry system) use same door courtesy switch signal.

OK:

Illuminated entry system function operates normally.

NG -- GO TO LIGHTING SYSTEM (Door Courtesy Switch Circuit) Door Courtesy Switch Circuit

OK -- REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)