Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH Removal

4. REMOVE INNER ROOF SIDE GARNISH LH Removal

5. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Remove the bolt.





(b) Disconnect the connector and remove the tire pressure warning receiver assembly.