Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY (for TMMK Made): REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Airbag System (for TMMK Made).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

(a) Remove the 4 bolts.





(b) Disconnect the airbag connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(c) Disengage the 2 claws and remove the DLC3.





(d) Disengage the 2 hooks and remove the driver side knee airbag assembly.