Installation

2AZ-FXE EXHAUST: EXHAUST PIPE: INSTALLATION

1. INSTALL REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET

(a) Install the rear support bracket with the 2 bolts.





Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

NOTICE:
Be sure to install the bracket in the correct direction.

2. INSTALL FRONT EXHAUST PIPE ASSEMBLY

(a) Install a new gasket onto the front exhaust pipe assembly.

(b) Install the front exhaust pipe assembly with the 2 nuts.





Torque : 62 Nm (632 kgf-cm, 46 ft-lbf)

(c) Install the front exhaust pipe No. 1 support bracket with the 2 nuts.

Torque : 33 Nm (337 kgf-cm, 24 ft-lbf)

3. INSTALL HEATED OXYGEN SENSOR Installation

4. INSTALL CENTER EXHAUST PIPE ASSEMBLY

(a) Install a new gasket onto the front exhaust pipe.

(b) Install the center exhaust pipe assembly with the 2 bolts and 2 nuts.





Torque : 56 Nm (571 kgf-cm, 41 ft-lbf)

5. INSTALL TAIL PIPE ASSEMBLY

(a) Install a new gasket onto the center exhaust pipe assembly.

(b) Install the tail pipe assembly with the 2 nuts.





Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

6. INSPECT FOR EXHAUST GAS LEAK

If gas is leaking, tighten the areas necessary to stop the leak. Replace the damaged parts as necessary.