Electronically Controlled Brake System

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

HINT
* If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the page for the respective DTC Code in the DTC chart.
* Inspect the fuse and relay before investigating the trouble areas as shown in the table below.

ABS DTC













1. Drive the vehicle at the speed of 50 km/h (31 mph) and depress the brake pedal strongly for approximately 3 seconds.

2. Repeat the above operation 3 times or more and check that the ABS warning light goes off.

3. Clear the DTC.

HINT
* In some cases, Techstream cannot be used when the ABS warning light remains on.
* When U0073/94, U0123/62, U0124/95, U0126/63, U0131/67, or U0293/59 is output, inspect and repair the trouble areas indicated by these codes first.

VSC DTC









Electronically Controlled Brake DTC





















(*1): These codes are displayed to indicate the ABS and Electronically Controlled Brake DTCs.

ABS Test Mode DTC





VSC Test Mode DTC





Electronically Controlled Brake Test Mode DTC