Installation

MIRROR (INT): INNER REAR VIEW MIRROR: INSTALLATION

1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

(a) Using a "TORX" socket wrench (T20), install the inner rear view mirror assembly with the screw.





Torque : 1.8 Nm (18 kgf-cm, 16 in-lbf)

2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

(a) w/ Automatic High Beam System:

NOTICE:
* Do not touch the camera lens (built into the inner rear view mirror assembly) with a bare hand.
* Do not allow anything to adhere to the camera lens (built into the inner rear view mirror assembly).
* Do not apply strong impacts to the inner rear view mirror assembly.
* Do not allow any liquid to get on the inner rear view mirror assembly.
(1) Using a "TORX" socket wrench (T20), install the inner rear view mirror assembly with the screw.

Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf)





(2) Connect the connector.

(b) w/o Automatic High Beam System:

(1) Using a "TORX" socket wrench (T20), install the inner rear view mirror assembly with the screw.

Torque : 1.5 Nm (15 kgf-cm, 13 in-lbf)





(2) Connect the connector.

3. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

(a) Engage the 2 claws.





(b) Slide the inner rear view mirror stay holder cover and engage the 2 claws and install the cover as shown in the illustration.