Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions

2. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

5. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

6. REMOVE STEERING PAD Removal

7. REMOVE STEERING WHEEL ASSEMBLY Removal

8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

9. REMOVE HORN BUTTON WIRE SUB-ASSEMBLY (w/o Steering Pad Switch and Cruise Control System)

(a) w/o Ornament:

(1) Disconnect the connector and remove the horn button wire sub-assembly.





10. REMOVE LOWER STEERING COLUMN COVER Removal

11. REMOVE UPPER STEERING COLUMN COVER Removal

12. REMOVE SPIRAL CABLE (w/o VSC)

(a) Disconnect the connectors from the spiral cable.





NOTICE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable.

13. REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR (w/ VSC)

(a) Disconnect the connectors from the spiral cable with steering angle sensor.





NOTICE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable with steering angle sensor.

14. REMOVE SPIRAL CABLE (w/ VSC)

(a) Disengage the 6 claws and 2 pins, and remove the spiral cable from the steering angle sensor.