Installation

LIGHTING: STOP LIGHT CONTROL RELAY: INSTALLATION

1. INSTALL STOP LIGHT CONTROL RELAY

(a) Connect the connector.





(b) Engage the clamp and install the stop light control relay.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (for TMC Made) Installation

3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (for TMMK Made) Installation

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMC Made) Installation

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMMK Made) Installation

6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSPECT SRS WARNING LIGHT

Diagnosis System