Removal

BRAKE CONTROL: SKID CONTROL ECU (for TMMK Made): REMOVAL

1. PRECAUTION

NOTICE:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

HINT
Refer the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD". Removal

4. SEPARATE WIRING HARNESS CLAMP BRACKET

(a) Disconnect the wiring harness clamp and connectors.

(b) Remove the 2 nuts and the bolt, and separate the wiring harness clamp bracket.





5. REMOVE SKID CONTROL ECU

(a) Disconnect the 4 skid control ECU connectors.





(b) Remove the 2 nuts and skid control ECU.