Electronically Controlled Brake System
BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART
HINT
* If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the respective DTC Code in the DTC chart.
* Inspect the fuse and relay before investigating the trouble areas as shown in the table below.
DTC chart of ABS:
42 / C0200/31-C1235/35:
C1236/36-C1442/44:
U0124/95:
* Drive the vehicle at the speed of 50 km/h (31 mph) and depress the brake pedal strongly for approximately 3 seconds.
* Repeat the above operation 3 times or more and check that the ABS warning light goes off.
* Clear the DTC.
HINT
* In some cases, Techstream cannot be used when the ABS warning light remains on.
* When U0073/94, U0123/62, U0124/95, U0126/63, U0131/67, or U0293/59 is output, inspect and repair the trouble areas indicated by these codes first.
DTC chart of VSC:
43-45 / C1210/36-C1445/66:
U0123/62-U0131/67:
DTC chart of Electronically Controlled Brake:
36 / C1202/68-C1247/47:
C1249/49-C1313/13:
C1314/14-C1354/25:
C1355/27-C1368/67:
C1377/43-C1392/48 / U0073/94-U0293/59:
(*1): These codes are displayed to indicate the ABS and Electronically Controlled Brake DTCs.
Test Mode DTC of ABS:
Test Mode DTC of ABS::
Test Mode DTC of VSC:
Test Mode DTC of VSC::
Test Mode DTC of Electronically Controlled Brake:
