Removal

AUDIO / VISUAL: MULTI-DISPLAY: REMOVAL

1. TABLE OF BOLT, SCREW AND NUT Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE STEERING WHEEL COVER LOWER NO. 2 Removal

4. REMOVE STEERING WHEEL COVER LOWER NO. 3 Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY Removal

7. REMOVE STEERING COLUMN COVER Removal

8. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE Removal

9. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1 Removal

10. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2 Removal

11. REMOVE INSTRUMENT PANEL FINISH PLATE Removal

12. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal

13. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER Removal

14. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

15. REMOVE ACCESSORY METER ASSEMBLY Removal

16. REMOVE MULTI DISPLAY

(a) Disengage the 9 claws and remove the back cover.





(b) Remove the 4 screws and multi display.