Removal

2AZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY:

REMOVAL

1. DRAIN ENGINE COOLANT
HINT: (Service and Repair).

2. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
3. REMOVE THROTTLE BODY ASSEMBLY
(a) Disconnect the throttle control motor & throttle position sensor connector.
(b) Disconnect the vacuum hose from the throttle body.
(c) Disconnect the 2 water by-pass hoses.
(d) Disconnect the vent hose from the throttle body.





(e) Remove the 4 bolts, fuel pipe support and throttle body.
(f) Remove the gasket.