Installation

2AZ-FE ENGINE MECHANICAL: DRIVE BELT:

INSTALLATION

1. INSTALL FAN AND GENERATOR V BELT





(a) Using SST, slowly turn the V-ribbed belt tensioner clockwise and install the V belt.
SST: 09249-63010

- Make sure that SST and other tools are set to the tensioner securely.
- When compressing the V-ribbed belt tensioner, slowly turn the tensioner.

2. INSTALL ENGINE MOUNTING BRACKET NO.2 RH
Torque: 52 Nm (531 kgf-cm, 38 ft-lbf)
3. INSTALL ENGINE MOUNTING STAY NO.2 RH
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
4. INSTALL ENGINE MOVING CONTROL ROD W/BRACKET





(a) Install the engine control rod with the 3 bolts.
Torque: 64 Nm (653 kgf-cm, 47 ft-lbf)
5. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)