Installation

2AZ-FE COOLING: THERMOSTAT:

INSTALLATION

1. INSTALL THERMOSTAT





(a) Install a new gasket to the thermostat.
(b) Install the thermostat with the jiggle valve facing up.

HINT: The jiggle valve may be set within 10° on either side of the prescribed position.

2. INSTALL WATER INLET
(a) Install the water inlet with the 2 nuts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
3. INSTALL RADIATOR HOSE INLET
4. INSTALL GENERATOR ASSEMBLY
5. INSTALL FAN AND GENERATOR V BELT
6. ADD ENGINE COOLANT
7. INSPECT FOR COOLANT LEAK