Removal

A246E AUTOMATIC TRANSAXLE: FLOOR SHIFT ASSEMBLY:

COMPONENTS

REMOVAL

1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER

HINT: (Removal)

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CTR

HINT: (Removal)

3. REMOVE INSTRUMENT PANEL BOX

HINT: (Removal)

4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

HINT: (Removal)

5. DISCONNECT FLOOR SHIFT PARKING LOCK CABLE ASSEMBLY

(a) Push the claw and disconnect the parking lock cable assembly from the shift lock release link.

(b) Using a screwdriver, disconnect the parking lock cable assembly from the shift lever plate.

HINT: Tape up the screwdriver tip before use.

6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Disconnect the control cable end from the shift lever.

(b) Using a screwdriver, disconnect the control cable from the shift lever plate.

HINT: Tape up the screwdriver tip before use.

7. REMOVE FLOOR SHIFT ASSEMBLY

(a) Disconnect the shift lock control ECU connector and indicator lamp wire connector.
(b) Disconnect the wire harness clamp.