Installation

1ZZ-FE COOLING: THERMOSTAT:

COMPONENTS









INSTALLATION

1. INSTALL THERMOSTAT
(a) Install a new gasket onto the thermostat.





(b) Install the thermostat with the jiggle valve upward.

HINT: The jiggle valve may be set within 10° of either side of the prescribed position.

2. INSTALL WATER INLET





(a) Install the water inlet with the 2 nuts.
Torque: 11 Nm (112 kgf-cm, 8 ft-lbf)
3. INSTALL GENERATOR ASSEMBLY (Installation)

4. ADD ENGINE COOLANT (Testing and Inspection)

5. INSPECT FOR COOLANT LEAK (Testing and Inspection)

6. INSTALL ENGINE UNDER COVER RH