Removal

SEAT: REAR SEAT ASSEMBLY:

COMPONENTS









REMOVAL

HINT:
- A bolt without a torque specification is shown in the standard bolt chart.
- Tape the screwdriver tip before prying parts with it.

NOTE: Wear the gloves, because the cutting surface of the seatback frame and seat cushion frame may injure your hand.

1. REMOVE REAR SEAT ASSEMBLY LH
(a) Remove the headrest.
(b) Using a screwdriver, remove the 2 seatback hinge covers.
(c) Remove the 4 bolts and rear seat assembly LH.
2. REMOVE REAR SEAT ASSEMBLY RH
(a) Remove the headrest.
(b) Remove the bolt and rear seat lap type belt center floor anchor.
(c) Using a screwdriver, remove the 2 seatback hinge covers.
(d) Remove the 4 bolts and rear seat assembly RH.