Disassembly

SEAT: FRONT SEAT ASSEMBLY (for LH Side):

COMPONENTS






DISASSEMBLY

1. REMOVE VERTICAL ADJUSTING HANDLE





(a) Using a screwdriver, disengage the 3 claws and remove the vertical seat adjuster knob cap.

HINT: Tape the screwdriver tip before use.

(b) Remove the 2 screws and vertical adjusting handle.
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH





(a) Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, disengage the claw and remove the release handle.

HINT: Tape the screwdriver tip before use.

3. REMOVE FRONT SEAT CUSHION SHIELD LH





(a) Remove the screw.
(b) Using a screwdriver, disengage the 2 claws and clip. Then remove the cushion shield.

HINT: Tape the screwdriver tip before use.

4. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH





(a) Remove the bolt and belt.
(b) Remove the screw.
(c) Using a screwdriver, disengage the 2 claws and clip. Then remove the cushion shield inner LH together with the wire harness of the inner belt.

HINT: Tape the screwdriver tip before use.

(d) Using a screwdriver, disengage the 3 claws and remove the cushion shield inner LH from the wire harness of the inner belt.

HINT: Tape the screwdriver tip before use.

(e) Disengage the clamps and disconnect the connector. Then remove the belt.
5. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER





(a) Disengage the hook and remove the hog rings and seat cushion cover (together with the pad) from the seat adjuster.
(b) Remove the hog rings and cushion cover.
6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER





(a) Remove the hog rings. Then open the lower part of the seatback cover.
(b) Disengage the 4 claws and remove the 2 headrest supports.





(c) w/ Side airbag:
Remove the nut and 2 seatback cover brackets.
(d) Remove the seatback cover (together with the pad) from the seat adjuster.
(e) Remove the hog rings and front seatback cover from the seatback pad.
7. REMOVE RECLINING ADJUSTER INSIDE COVER LH (UPPER)
(a) Remove the screw and inside cover.
8. REMOVE RECLINING ADJUSTER INSIDE COVER RH (UPPER)
(a) Remove the screw and inside cover.
9. REMOVE RECLINING ADJUSTER INSIDE COVER LH (LOWER)
(a) Remove the screw and inside cover.
10. REMOVE RECLINING ADJUSTER INSIDE COVER RH (LOWER)
(a) Remove the screw and inside cover.
11. REMOVE FRONT SEAT CUSHION SHIELD LOWER LH
(a) Using a screwdriver, disengage the claws and remove the cushion shield.

HINT: Tape the screwdriver tip before use.

12. REMOVE FRONT SEAT CUSHION SHIELD LOWER RH
(a) Using a screwdriver, disengage the claws and remove the cushion shield.

HINT: Tape the screwdriver tip before use.

13. REMOVE VERTICAL ADJUSTER SPACER
(a) Using a screwdriver, disengage the claws and remove the spacer.

HINT: Tape the screwdriver tip before use.

14. REMOVE SEAT POSITION AIR BAG SENSOR
(a) Disconnect the wire harness connector.
(b) Disengage the claw and remove the seat slide position protector.
(c) Using a torx socket wrench (T30), remove the torx bolt and airbag sensor.