Installation

EXTERIOR: FRONT BUMPER:

COMPONENTS










INSTALLATION

1. INSTALL FRONT LICENSE PLATE MOUNTING BRACKET
(a) Install the bracket with the 2 screws.
2. INSTALL FRONT BUMPER SIDE SUPPORT LH
(a) Install the side support with a screw.
3. INSTALL FRONT BUMPER SIDE SUPPORT RH
(a) Install the side support with a screw.
4. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
5. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
6. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
7. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)
8. INSTALL FRONT BUMPER SIDE MOUNTING BRACKET LH
9. INSTALL FRONT BUMPER SIDE MOUNTING BRACKET RH
10. INSTALL FRONT BUMPER REINFORCEMENT
(a) Install the reinforcement with the 4 nuts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
(b) Install the 2 connector clamps.
11. INSTALL FRONT BUMPER ENERGY ABSORBER
12. INSTALL FRONT BUMPER EXTENTION MOUNTING BRACKET
13. INSTALL FRONT BUMPER COVER LOWER
(a) Install the cover lower with the 8 claws and 2 bolts.
14. INSTALL FRONT BUMPER COVER
(a) Install the bumper cover with the 4 screws, 3 clips and 2 bolts.
(b) Aero type:
Install the bumper with the 6 screws, 3 clips and 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
15. INSTALL FRONT BUMPER EXTENSION LH
16. INSTALL FRONT BUMPER EXTENSION RH
17. INSTALL FRONT FENDER LINER LH
(a) Install the fender liner with the 2 clips.
(b) Aero type:
Install the fender liner with the 4 clips.
18. INSTALL FRONT FENDER LINER RH
(a) Use the same procedures described for the LH side.