Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY (for TMMK Made):

INSTALLATION

1. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY






(a) Connect the 2 connectors.
(b) Install the clamp and the instrument panel wire assembly on the front passenger airbag assembly.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY






(a) Engage the 10 hooks and install the front passenger airbag assembly on the instrument panel.






(b) Install the 2 screws.
3. INSTALL NO. 3 INSTRUMENT PANEL STAY Installation

4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY Installation

5. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY






(a) Connect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

6. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH Installation

7. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Installation

8. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY Installation

10. INSTALL FRONT PILLAR GARNISH LH Installation

11. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation

12. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY Installation

13. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY Installation

14. INSTALL FRONT PILLAR GARNISH RH Installation

15. INSTALL NO. 1 CONSOLE BOX INSERT FRONT Installation

16. INSTALL NO. 2 CONSOLE BOX INSERT FRONT Installation

17. INSTALL CONSOLE BOX ASSEMBLY Installation

18. INSTALL CONSOLE BOX CARPET Installation

19. INSTALL CONSOLE BOX POCKET Installation

20. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/o Navigation System) Installation

21. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System) Installation

22. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY Installation

23. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

24. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Installation

25. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Installation

26. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

27. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

28. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation

29. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation

30. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY Installation

31. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation

32. INSTALL FRONT DOOR SCUFF PLATE RH Installation

33. INSTALL COMBINATION METER ASSEMBLY Installation

34. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation

35. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation

36. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY Installation

37. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation

38. ADJUST SPIRAL CABLE Installation

39. INSTALL STEERING COLUMN COVER Installation

40. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation

41. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

42. INSTALL FRONT DOOR SCUFF PLATE LH Installation

43. INSTALL STEERING WHEEL ASSEMBLY Installation

44. INSTALL STEERING PAD Installation

45. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation

46. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation

47. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
48. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.

49. INSPECT STEERING PAD Installation

50. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.