Reading and Clearing Diagnostic Trouble Codes

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM:

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the tester on.
(d) Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
(e) Check the details of the DTC(s) Engine Immobiliser System.
2. CLEAR DTC
(a) Connect Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the tester on.
(d) Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
(e) Erase the DTCs.