Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

B2785








ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2785: Communication Malfunction between ECUs Connected by LIN

DTC B2785 - Communication Malfunction between ECUs Connected by LIN

DESCRIPTION

This DTC is output when LIN communication from the certification ECU stops for a certain amount of time.
HINT: If this DTC B2785 is detected simultaneously with DTC B2786 , B2789 or B2287, troubleshoot DTC B2786, B2789 or B2287 first.





o: DTC is output
-: DTC is not output





WIRING DIAGRAM





INSPECTION PROCEDURE
NOTICE:
- If the certification ECU or ID code box is replaced, register the key and ECU communication ID .
- If the steering lock ECU or main body ECU is replaced, register the ECU code and ECU communication ID .

PROCEDURE

1. CHECK DTC OUTPUT
(a) Delete the DTCs .
(b) Recheck for DTCs .
Result:






B -- USE SIMULATION METHOD TO CHECK
A -- Continue to next step.
2. REPLACE CERTIFICATION ECU
(a) Replace the certification ECU.
NEXT -- Continue to next step.
3. ELECTRICAL KEY REGISTRATION
(a) Register the electrical key code in the certification ECU .
NEXT -- Continue to next step.
4. REGISTER ECU COMMUNICATION ID
(a) Register the ECU communication ID between the ID code box and hybrid vehicle control ECU .
NEXT -- Continue to next step.
5. CHECK DTC OUTPUT
(a) Delete the DTCs .
(b) Recheck for DTCs .
Result:






B -- END
A -- Continue to next step.
6. REPLACE MAIN BODY ECU (INSTRUMENT PANEL J/B)
(a) Replace the main body ECU (Instrument panel J/B).
NEXT -- Continue to next step.
7. ECU CODE REGISTRATION
(a) Register the ECU code between the ECUs connected by LIN communication .
NEXT -- Continue to next step.
8. CHECK DTC OUTPUT
(a) Delete the DTCs .
(b) Recheck for DTCs .
Result:






B -- END
A -- Continue to next step.
9. REPLACE STEERING LOCK ECU
(a) Replace the steering lock ECU.
NEXT -- Continue to next step.
10. ECU CODE REGISTRATION
(a) Register the ECU code between the ECUs connected by LIN communication .
NEXT -- Continue to next step.
11. CHECK DTC OUTPUT
(a) Delete the DTCs .
(b) Recheck for DTCs .
Result:






B -- END
A -- REPLACE ID CODE BOX