DTC 01-DD

DTC 01-DD Master Reset
DTC 01-E1 Voice Processing Device ON Error

DTC Detection Condition:

DESCRIPTION

HINT:
- *1: This code may be stored if the engine is started and the ignition switch is turned to START position again.
- *2: Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage.

NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT. Then, check for DTCs and troubleshoot according to the output DTCs.
- The radio receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.

Step 1-2:

Step 2(continued)-3:

Step 3(continued)-4:

Step 5:

INSPECTION PROCEDURE

NOTE: Be sure to read DESCRIPTION before performing the following procedures.