DTC 01-DC

DTC 01-DC Transmission Error

DTC Detection Condition:

DESCRIPTION

HINT: *1: This code may be stored if the engine is started, idled for 60 seconds and then started again.

NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT. Then, check for DTCs and troubleshoot according to the output DTCs.
- The radio receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.

Step 1-2:

Step 2(continued):

Step 2(continued)-5:

INSPECTION PROCEDURE

NOTE: Be sure to read DESCRIPTION before performing the following procedures.