CD Sound Skips

NAVIGATION: NAVIGATION SYSTEM: CD Sound Skips

CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CD




(a) Check the CD.
OK:
The CD is clean.

HINT: If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE: Do not use a conventional record cleaner or anti-static preservative.

NG -- CLEAN CD
OK -- Continue to next step.
2. CHECK CD





(a) Check that the CD is not deformed or cracked.
OK:
No deformation or cracks on the CD.
NG -- CD IS FAULTY
OK -- Continue to next step.
3. CHECK OPERATION OF ANOTHER CD
(a) Check using another CD.
(1) Check if the problem recurs using another CD.
OK:
The problem does not occur.
OK -- CD IS FAULTY
NG -- Continue to next step.
4. CHECK RADIO AND NAVIGATION ASSEMBLY
(a) Check the radio and navigation assembly installation condition.
(1) Check that the radio and navigation assembly is properly installed.
OK:
Radio and navigation assembly is properly installed.
NG -- REINSTALL RADIO AND NAVIGATION ASSEMBLY
OK -- REPLACE RADIO AND NAVIGATION ASSEMBLY